Showing posts with label machines. Show all posts
Showing posts with label machines. Show all posts

Monday, June 22, 2015

S100 - Prusa i3 - Custom Aluminium Frame - Part 2

Engraving more logo-love: I CNC machined it. 
 I ended up engraving one side with a larger logo pattern and the other with a smaller variation. Despite the minor alignment issues, I'm pretty happy with the results! The pattern isn't exactly what I had originally wanted (due to careless vinyl application during the etching step) but I'm really happy with the results. MAN - that would have taken a long time to do by hand! I love technology (today). 


 #TOTD (tools of the day)



... And a quick look at it partially assembled. 


I <3 CNC machines  <--- T-Shirts coming soon ;)

Friday, June 19, 2015

S100 - Prusa i3 - Custom Aluminium Frame - Part 1

 This week I designed a pattern to go on the frame of my Prusa i3. I am doing two different surface treatments - etching and CNC engraving. Today, I cut the vinyl sticker on the vinyl cutter for the resist and etched the aluminium.


I had to piece some of the edges together due to scale in Sure-cuts-a-lot being different than Rhino. 
Frankie helped me mix up a batch of root kill, salt and water to etch the aluminium. After agitating in the solution for about 5 minutes, we took out the frame and the results are below. 

Rinsing off all of the reddish-brown build up from the solution. 
Peeling the resist off of the frame was tedious but well worth it for the results. 
I'm really pleased with the level of detail the etching gave me. The natural oxidation of the aluminum is also a nice variation. I'm not sure If I will keep it until the end - but I will definitely wait to see what it looks like with the CNC engraved details before I clean it up. 


To be continued...


Wednesday, May 6, 2015

Machines that Make - Carriage

Today, I wired up the LED Matrix for the short axis carriage and designed the mount. The mount is made out of 1/8" acrylic that I laser cut to size. I tapped screw holes for the 2mm screws that came with the LED Matrix for constructing. I welded all of the acrylic parts together with Weld On. I then designed a space for the light to sit further elevated off of the carriage - so that I get the maximum travel distance out of the short axis. The new modified mount works well with the endstop. I've also uploaded a couple videos of the machine in action from when I was testing out code for the movement and the light pattern. I'm pretty happy with the progress... Even though it is doing something completely different than what I envisioned it would do. 










Tuesday, May 5, 2015

Machines that Make - Mechanism Install

This weekend I installed the mechanism onto the structure of the machine. I've added a 40 teeth pulley to the long axis that I am using with a high torque 60mm Nema17 and a 16 teeth pulley to the short axis that is attached to a 34mm Nema17. I'm using GT2 belts for both axes. 












Sunday, May 3, 2015

Machines that Make - Endstops

Today, I added end-stops and finished all the ends of my wire with sockets. 
The end-stop design came from thingiverse, but I drew a new version to hold a 10mm rod (below). Also, preparing wires to go into sockets is hard. If I were to do this again.... I think I would make a machine that doesn't require any wiring... AH HA just kidding, I am getting better at it slowly.   




Machines that Make - Structure - Part 2

Drum roll, please ............................ The painting is done and the acrylic has been installed! Here is an in progress image, just a little sneak peak ;).




Monday, April 27, 2015

Machines that Make - Structure

Over the weekend I started to build the wall that will house my Machine that Makes project. There is a steel stud frame, plywood, sheet metal, lots of metal screws, more plywood etc. I added a hinge to the back panel that will hold the steel rods that make up my machine, for easy access. Eventually, I will also add some trim over the shims that surround the acrylic. Next step is to fill the screw holes in the plywood, sand and paint. 












Monday, April 20, 2015

Friday, April 17, 2015

Machines that Make - Making Parts - Part 2





Mocked up X Idler
Mocked up X Idler

In addition to the corners, I also designed new X axis parts this week. Taking cues for the Prusia i3 parts I had already printed, I made a few modifications to allow for 8mm and 10mm steel rod. I started by printing a few test pieces at 2% infill and 2 shells, on Fast.
  
New Part designs - with modifications after test prints:
 The take a LONG time to print at 45% infill and 3 shells! 


Assembly and testing with the motors: 



 There is a bit of sag in the rod - so hopefully I will be using the smaller, 34mm Nema 17's, instead of the higher torque...